python-meshtastic/info/mac/rak4631_19003.txt at master · digitaldisarray/python-meshtastic · GitHub - github.com

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68


>   | +-o WisCore RAK4631 Board@14400000  <class AppleUSBDevice, id 0x10005c158, registered, matched, active, busy 0 (18 ms), retain 14>


/dev/cu.usbmodem14401

% ls -al /dev/*modem*
crw-rw-rw-  1 root  wheel  0x9000005 Jan 29 15:32 /dev/cu.usbmodem14401
crw-rw-rw-  1 root  wheel  0x9000004 Jan 29 15:31 /dev/tty.usbmodem14401


Note: On a Mac Air, output is:

% system_profiler SPUSBDataType
USB:
    USB 3.1 Bus:
      Host Controller Driver: AppleT8103USBXHCI
    USB 3.1 Bus:
      Host Controller Driver: AppleT8103USBXHCI
        WisCore RAK4631 Board:
          Product ID: 0x8029
          Vendor ID: 0x239a
          Version: 1.00
          Serial Number: E6CF9502B1D410D8
          Speed: Up to 12 Mb/s
          Manufacturer: RAKwireless
          Location ID: 0x01100000 / 2
          Current Available (mA): 500
          Current Required (mA): 100
          Extra Operating Current (mA): 0

However, in FTHR840BOOT mode, it shows this:

% system_profiler SPUSBDataType
USB:
    USB 3.1 Bus:
      Host Controller Driver: AppleT8103USBXHCI
    USB 3.1 Bus:
      Host Controller Driver: AppleT8103USBXHCI
        Feather nRF52840 Express:
          Product ID: 0x0029
          Vendor ID: 0x239a
          Version: 1.00
          Serial Number: E6CF9502B1D410D8
          Speed: Up to 12 Mb/s
          Manufacturer: Adafruit Industries
          Location ID: 0x01100000 / 1
          Current Available (mA): 500
          Current Required (mA): 100
          Extra Operating Current (mA): 0
          Media:
            nRF UF2:
              Capacity: 33.7 MB (33,690,112 bytes)
              Removable Media: Yes
              BSD Name: disk4
              Logical Unit: 0
              Partition Map Type: Unknown
              S.M.A.R.T. status: Verified
              USB Interface: 2


$ cat /Volumes/FTHR840BOOT/INFO_UF2.TXT
UF2 Bootloader 0.3.2-109-gd6b28e6-dirty lib/nrfx (v2.0.0) lib/tinyusb (0.6.0-272-g4e6aa0d8) lib/uf2 (heads/master)
Model: Adafruit Feather nRF52840 Express
Board-ID: nRF52840-Feather-revD
SoftDevice: S140 version 6.1.1
Date: Jun 16 2020