`plotly.graph_objects`.Scatterternary¶

class plotly.graph_objects.Scatterternary(arg=None, a=None, asrc=None, b=None, bsrc=None, c=None, cliponaxis=None, connectgaps=None, csrc=None, customdata=None, customdatasrc=None, fill=None, fillcolor=None, hoverinfo=None, hoverinfosrc=None, hoverlabel=None, hoveron=None, hovertemplate=None, hovertemplatesrc=None, hovertext=None, hovertextsrc=None, ids=None, idssrc=None, legendgroup=None, legendgrouptitle=None, legendrank=None, legendwidth=None, line=None, marker=None, meta=None, metasrc=None, mode=None, name=None, opacity=None, selected=None, selectedpoints=None, showlegend=None, stream=None, subplot=None, sum=None, text=None, textfont=None, textposition=None, textpositionsrc=None, textsrc=None, texttemplate=None, texttemplatesrc=None, uid=None, uirevision=None, unselected=None, visible=None, **kwargs)¶

__init__(arg=None, a=None, asrc=None, b=None, bsrc=None, c=None, cliponaxis=None, connectgaps=None, csrc=None, customdata=None, customdatasrc=None, fill=None, fillcolor=None, hoverinfo=None, hoverinfosrc=None, hoverlabel=None, hoveron=None, hovertemplate=None, hovertemplatesrc=None, hovertext=None, hovertextsrc=None, ids=None, idssrc=None, legendgroup=None, legendgrouptitle=None, legendrank=None, legendwidth=None, line=None, marker=None, meta=None, metasrc=None, mode=None, name=None, opacity=None, selected=None, selectedpoints=None, showlegend=None, stream=None, subplot=None, sum=None, text=None, textfont=None, textposition=None, textpositionsrc=None, textsrc=None, texttemplate=None, texttemplatesrc=None, uid=None, uirevision=None, unselected=None, visible=None, **kwargs)¶

Construct a new Scatterternary object

Provides similar functionality to the “scatter” type but on a ternary phase diagram. The data is provided by at least two arrays out of a, b, c triplets.

Parameters

arg – dict of properties compatible with this constructor or an instance of plotly.graph_objects.Scatterternary
a – Sets the quantity of component a in each data point. If a, b, and c are all provided, they need not be normalized, only the relative values matter. If only two arrays are provided they must be normalized to match ternary.sum.
asrc – Sets the source reference on Chart Studio Cloud for a.
b – Sets the quantity of component a in each data point. If a, b, and c are all provided, they need not be normalized, only the relative values matter. If only two arrays are provided they must be normalized to match ternary.sum.
bsrc – Sets the source reference on Chart Studio Cloud for b.
c – Sets the quantity of component a in each data point. If a, b, and c are all provided, they need not be normalized, only the relative values matter. If only two arrays are provided they must be normalized to match ternary.sum.
cliponaxis – Determines whether or not markers and text nodes are clipped about the subplot axes. To show markers and text nodes above axis lines and tick labels, make sure to set xaxis.layer and yaxis.layer to below traces.
connectgaps – Determines whether or not gaps (i.e. {nan} or missing values) in the provided data arrays are connected.
csrc – Sets the source reference on Chart Studio Cloud for c.
customdata – Assigns extra data each datum. This may be useful when listening to hover, click and selection events. Note that, “scatter” traces also appends customdata items in the markers DOM elements
customdatasrc – Sets the source reference on Chart Studio Cloud for customdata.
fill – Sets the area to fill with a solid color. Use with fillcolor if not “none”. scatterternary has a subset of the options available to scatter. “toself” connects the endpoints of the trace (or each segment of the trace if it has gaps) into a closed shape. “tonext” fills the space between two traces if one completely encloses the other (eg consecutive contour lines), and behaves like “toself” if there is no trace before it. “tonext” should not be used if one trace does not enclose the other.
fillcolor – Sets the fill color. Defaults to a half-transparent variant of the line color, marker color, or marker line color, whichever is available.
hoverinfo – Determines which trace information appear on hover. If none or skip are set, no information is displayed upon hovering. But, if none is set, click and hover events are still fired.
hoverinfosrc – Sets the source reference on Chart Studio Cloud for hoverinfo.
hoverlabel – plotly.graph_objects.scatterternary.Hoverlabel instance or dict with compatible properties
hoveron – Do the hover effects highlight individual points (markers or line points) or do they highlight filled regions? If the fill is “toself” or “tonext” and there are no markers or text, then the default is “fills”, otherwise it is “points”.
hovertemplate – Template string used for rendering the information that appear on hover box. Note that this will override hoverinfo. Variables are inserted using %{variable}, for example “y: %{y}” as well as %{xother}, {%_xother}, {%_xother_}, {%xother_}. When showing info for several points, “xother” will be added to those with different x positions from the first point. An underscore before or after “(x|y)other” will add a space on that side, only when this field is shown. Numbers are formatted using d3-format’s syntax %{variable:d3-format}, for example “Price: %{y:$.2f}”. https://github.com/d3/d3-format/tree/v1.4.5#d3-format for details on the formatting syntax. Dates are formatted using d3-time-format’s syntax %{variable|d3-time-format}, for example “Day: %{2019-01-01|%A}”. https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format for details on the date formatting syntax. The variables available in hovertemplate are the ones emitted as event data described at this link https://plotly.com/javascript/plotlyjs-events/#event- data. Additionally, every attributes that can be specified per-point (the ones that are arrayOk: true) are available. Anything contained in tag <extra> is displayed in the secondary box, for example “<extra>{fullData.name}</extra>”. To hide the secondary box completely, use an empty tag <extra></extra>.
hovertemplatesrc – Sets the source reference on Chart Studio Cloud for hovertemplate.
hovertext – Sets hover text elements associated with each (a,b,c) point. If a single string, the same string appears over all the data points. If an array of strings, the items are mapped in order to the the data points in (a,b,c). To be seen, trace hoverinfo must contain a “text” flag.
hovertextsrc – Sets the source reference on Chart Studio Cloud for hovertext.
ids – Assigns id labels to each datum. These ids for object constancy of data points during animation. Should be an array of strings, not numbers or any other type.
idssrc – Sets the source reference on Chart Studio Cloud for ids.
legendgroup – Sets the legend group for this trace. Traces part of the same legend group hide/show at the same time when toggling legend items.
legendgrouptitle – plotly.graph_objects.scatterternary.Legendgroup title instance or dict with compatible properties
legendrank – Sets the legend rank for this trace. Items and groups with smaller ranks are presented on top/left side while with *reversed* `legend.traceorder they are on bottom/right side. The default legendrank is 1000, so that you can use ranks less than 1000 to place certain items before all unranked items, and ranks greater than 1000 to go after all unranked items.
legendwidth – Sets the width (in px or fraction) of the legend for this trace.
line – plotly.graph_objects.scatterternary.Line instance or dict with compatible properties
marker – plotly.graph_objects.scatterternary.Marker instance or dict with compatible properties
meta – Assigns extra meta information associated with this trace that can be used in various text attributes. Attributes such as trace name, graph, axis and colorbar title.text, annotation text rangeselector, updatemenues and sliders label text all support meta. To access the trace meta values in an attribute in the same trace, simply use %{meta[i]} where i is the index or key of the meta item in question. To access trace meta in layout attributes, use %{data[n[.meta[i]} where i is the index or key of the meta and n is the trace index.
metasrc – Sets the source reference on Chart Studio Cloud for meta.
mode – Determines the drawing mode for this scatter trace. If the provided mode includes “text” then the text elements appear at the coordinates. Otherwise, the text elements appear on hover. If there are less than 20 points and the trace is not stacked then the default is “lines+markers”. Otherwise, “lines”.
name – Sets the trace name. The trace name appear as the legend item and on hover.
opacity – Sets the opacity of the trace.
selected – plotly.graph_objects.scatterternary.Selected instance or dict with compatible properties
selectedpoints – Array containing integer indices of selected points. Has an effect only for traces that support selections. Note that an empty array means an empty selection where the unselected are turned on for all points, whereas, any other non-array values means no selection all where the selected and unselected styles have no effect.
showlegend – Determines whether or not an item corresponding to this trace is shown in the legend.
stream – plotly.graph_objects.scatterternary.Stream instance or dict with compatible properties
subplot – Sets a reference between this trace’s data coordinates and a ternary subplot. If “ternary” (the default value), the data refer to layout.ternary. If “ternary2”, the data refer to layout.ternary2, and so on.
sum – The number each triplet should sum to, if only two of a, b, and c are provided. This overrides ternary.sum to normalize this specific trace, but does not affect the values displayed on the axes. 0 (or missing) means to use ternary.sum
text – Sets text elements associated with each (a,b,c) point. If a single string, the same string appears over all the data points. If an array of strings, the items are mapped in order to the the data points in (a,b,c). If trace hoverinfo contains a “text” flag and “hovertext” is not set, these elements will be seen in the hover labels.
textfont – Sets the text font.
textposition – Sets the positions of the text elements with respects to the (x,y) coordinates.
textpositionsrc – Sets the source reference on Chart Studio Cloud for textposition.
textsrc – Sets the source reference on Chart Studio Cloud for text.
texttemplate – Template string used for rendering the information text that appear on points. Note that this will override textinfo. Variables are inserted using %{variable}, for example “y: %{y}”. Numbers are formatted using d3-format’s syntax %{variable:d3-format}, for example “Price: %{y:$.2f}”. https://github.com/d3/d3-format/tree/v1.4.5#d3-format for details on the formatting syntax. Dates are formatted using d3-time-format’s syntax %{variable|d3-time-format}, for example “Day: %{2019-01-01|%A}”. https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format for details on the date formatting syntax. Every attributes that can be specified per-point (the ones that are arrayOk: true) are available. variables a, b, c and text.
texttemplatesrc – Sets the source reference on Chart Studio Cloud for texttemplate.
uid – Assign an id to this trace, Use this to provide object constancy between traces during animations and transitions.
uirevision – Controls persistence of some user-driven changes to the trace: constraintrange in parcoords traces, as well as some editable: true modifications such as name and colorbar.title. Defaults to layout.uirevision. Note that other user-driven trace attribute changes are controlled by layout attributes: trace.visible is controlled by layout.legend.uirevision, selectedpoints is controlled by layout.selectionrevision, and colorbar.(x|y) (accessible with config: {editable: true}) is controlled by layout.editrevision. Trace changes are tracked by uid, which only falls back on trace index if no uid is provided. So if your app can add/remove traces before the end of the data array, such that the same trace has a different index, you can still preserve user-driven changes if you give each trace a uid that stays with it as it moves.
unselected – plotly.graph_objects.scatterternary.Unselected instance or dict with compatible properties
visible – Determines whether or not this trace is visible. If “legendonly”, the trace is not drawn, but can appear as a legend item (provided that the legend itself is visible).

Returns

Return type

Scatterternary

`plotly.graph_objects`.scatterternary¶

plotly.graph_objects.scatterternary

class plotly.graph_objects.scatterternary.Hoverlabel(arg=None, align=None, alignsrc=None, bgcolor=None, bgcolorsrc=None, bordercolor=None, bordercolorsrc=None, font=None, namelength=None, namelengthsrc=None, **kwargs)¶

property align¶

Sets the horizontal alignment of the text content within hover label box. Has an effect only if the hover label text spans more two or more lines

The ‘align’ property is an enumeration that may be specified as:

One of the following enumeration values:
[‘left’, ‘right’, ‘auto’]
A tuple, list, or one-dimensional numpy array of the above

Returns
Return type: Any|numpy.ndarray

property alignsrc¶

Sets the source reference on Chart Studio Cloud for align.

The ‘alignsrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns
Return type: str

property bgcolor¶

Sets the background color of the hover labels for this trace

The ‘bgcolor’ property is a color and may be specified as:

A hex string (e.g. ‘#ff0000’)
An rgb/rgba string (e.g. ‘rgb(255,0,0)’)
An hsl/hsla string (e.g. ‘hsl(0,100%,50%)’)
An hsv/hsva string (e.g. ‘hsv(0,100%,100%)’)
A named CSS color:
aliceblue, antiquewhite, aqua, aquamarine, azure, beige, bisque, black, blanchedalmond, blue, blueviolet, brown, burlywood, cadetblue, chartreuse, chocolate, coral, cornflowerblue, cornsilk, crimson, cyan, darkblue, darkcyan, darkgoldenrod, darkgray, darkgrey, darkgreen, darkkhaki, darkmagenta, darkolivegreen, darkorange, darkorchid, darkred, darksalmon, darkseagreen, darkslateblue, darkslategray, darkslategrey, darkturquoise, darkviolet, deeppink, deepskyblue, dimgray, dimgrey, dodgerblue, firebrick, floralwhite, forestgreen, fuchsia, gainsboro, ghostwhite, gold, goldenrod, gray, grey, green, greenyellow, honeydew, hotpink, indianred, indigo, ivory, khaki, lavender, lavenderblush, lawngreen, lemonchiffon, lightblue, lightcoral, lightcyan, lightgoldenrodyellow, lightgray, lightgrey, lightgreen, lightpink, lightsalmon, lightseagreen, lightskyblue, lightslategray, lightslategrey, lightsteelblue, lightyellow, lime, limegreen, linen, magenta, maroon, mediumaquamarine, mediumblue, mediumorchid, mediumpurple, mediumseagreen, mediumslateblue, mediumspringgreen, mediumturquoise, mediumvioletred, midnightblue, mintcream, mistyrose, moccasin, navajowhite, navy, oldlace, olive, olivedrab, orange, orangered, orchid, palegoldenrod, palegreen, paleturquoise, palevioletred, papayawhip, peachpuff, peru, pink, plum, powderblue, purple, red, rosybrown, royalblue, rebeccapurple, saddlebrown, salmon, sandybrown, seagreen, seashell, sienna, silver, skyblue, slateblue, slategray, slategrey, snow, springgreen, steelblue, tan, teal, thistle, tomato, turquoise, violet, wheat, white, whitesmoke, yellow, yellowgreen
A list or array of any of the above

Returns
Return type: str|numpy.ndarray

property bgcolorsrc¶

Sets the source reference on Chart Studio Cloud for bgcolor.

The ‘bgcolorsrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns
Return type: str

property bordercolor¶

Sets the border color of the hover labels for this trace.

The ‘bordercolor’ property is a color and may be specified as:

A hex string (e.g. ‘#ff0000’)
An rgb/rgba string (e.g. ‘rgb(255,0,0)’)
An hsl/hsla string (e.g. ‘hsl(0,100%,50%)’)
An hsv/hsva string (e.g. ‘hsv(0,100%,100%)’)
A named CSS color:
aliceblue, antiquewhite, aqua, aquamarine, azure, beige, bisque, black, blanchedalmond, blue, blueviolet, brown, burlywood, cadetblue, chartreuse, chocolate, coral, cornflowerblue, cornsilk, crimson, cyan, darkblue, darkcyan, darkgoldenrod, darkgray, darkgrey, darkgreen, darkkhaki, darkmagenta, darkolivegreen, darkorange, darkorchid, darkred, darksalmon, darkseagreen, darkslateblue, darkslategray, darkslategrey, darkturquoise, darkviolet, deeppink, deepskyblue, dimgray, dimgrey, dodgerblue, firebrick, floralwhite, forestgreen, fuchsia, gainsboro, ghostwhite, gold, goldenrod, gray, grey, green, greenyellow, honeydew, hotpink, indianred, indigo, ivory, khaki, lavender, lavenderblush, lawngreen, lemonchiffon, lightblue, lightcoral, lightcyan, lightgoldenrodyellow, lightgray, lightgrey, lightgreen, lightpink, lightsalmon, lightseagreen, lightskyblue, lightslategray, lightslategrey, lightsteelblue, lightyellow, lime, limegreen, linen, magenta, maroon, mediumaquamarine, mediumblue, mediumorchid, mediumpurple, mediumseagreen, mediumslateblue, mediumspringgreen, mediumturquoise, mediumvioletred, midnightblue, mintcream, mistyrose, moccasin, navajowhite, navy, oldlace, olive, olivedrab, orange, orangered, orchid, palegoldenrod, palegreen, paleturquoise, palevioletred, papayawhip, peachpuff, peru, pink, plum, powderblue, purple, red, rosybrown, royalblue, rebeccapurple, saddlebrown, salmon, sandybrown, seagreen, seashell, sienna, silver, skyblue, slateblue, slategray, slategrey, snow, springgreen, steelblue, tan, teal, thistle, tomato, turquoise, violet, wheat, white, whitesmoke, yellow, yellowgreen
A list or array of any of the above

Returns
Return type: str|numpy.ndarray

property bordercolorsrc¶

Sets the source reference on Chart Studio Cloud for bordercolor.

The ‘bordercolorsrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns
Return type: str

property font¶

Sets the font used in hover labels.

The ‘font’ property is an instance of Font that may be specified as:

An instance of plotly.graph_objects.scatterternary.hoverlabel.Font

A dict of string/value properties that will be passed to the Font constructor

Supported dict properties:

color

colorsrc
Sets the source reference on Chart Studio Cloud for color.

family
HTML font family - the typeface that will be applied by the web browser. The web browser will only be able to apply a font if it is available on the system which it operates. Provide multiple font families, separated by commas, to indicate the preference in which to apply fonts if they aren’t available on the system. The Chart Studio Cloud (at https://chart-studio.plotly.com or on-premise) generates images on a server, where only a select number of fonts are installed and supported. These include “Arial”, “Balto”, “Courier New”, “Droid Sans”,, “Droid Serif”, “Droid Sans Mono”, “Gravitas One”, “Old Standard TT”, “Open Sans”, “Overpass”, “PT Sans Narrow”, “Raleway”, “Times New Roman”.

familysrc
Sets the source reference on Chart Studio Cloud for family.

size

sizesrc
Sets the source reference on Chart Studio Cloud for size.

Returns
Return type: plotly.graph_objects.scatterternary.hoverlabel.Font

property namelength¶

Sets the default length (in number of characters) of the trace name in the hover labels for all traces. -1 shows the whole name regardless of length. 0-3 shows the first 0-3 characters, and an integer >3 will show the whole name if it is less than that many characters, but if it is longer, will truncate to namelength - 3 characters and add an ellipsis.

The ‘namelength’ property is a integer and may be specified as:

An int (or float that will be cast to an int) in the interval [-1, 9223372036854775807]
A tuple, list, or one-dimensional numpy array of the above

Returns
Return type: int|numpy.ndarray

property namelengthsrc¶

Sets the source reference on Chart Studio Cloud for namelength.

The ‘namelengthsrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns
Return type: str

class plotly.graph_objects.scatterternary.Legendgrouptitle(arg=None, font=None, text=None, **kwargs)¶

property font¶

Sets this legend group’s title font.

The ‘font’ property is an instance of Font that may be specified as:

An instance of plotly.graph_objects.scatterternary.legendgrouptitle.Font

A dict of string/value properties that will be passed to the Font constructor

Supported dict properties:

color

family
HTML font family - the typeface that will be applied by the web browser. The web browser will only be able to apply a font if it is available on the system which it operates. Provide multiple font families, separated by commas, to indicate the preference in which to apply fonts if they aren’t available on the system. The Chart Studio Cloud (at https://chart-studio.plotly.com or on-premise) generates images on a server, where only a select number of fonts are installed and supported. These include “Arial”, “Balto”, “Courier New”, “Droid Sans”,, “Droid Serif”, “Droid Sans Mono”, “Gravitas One”, “Old Standard TT”, “Open Sans”, “Overpass”, “PT Sans Narrow”, “Raleway”, “Times New Roman”.

size

Returns
Return type: plotly.graph_objects.scatterternary.legendgrouptitle.Font

property text¶

Sets the title of the legend group.

The ‘text’ property is a string and must be specified as:

A string
A number that will be converted to a string

Returns
Return type: str

class plotly.graph_objects.scatterternary.Line(arg=None, backoff=None, backoffsrc=None, color=None, dash=None, shape=None, smoothing=None, width=None, **kwargs)¶

property backoff¶

Sets the line back off from the end point of the nth line segment (in px). This option is useful e.g. to avoid overlap with arrowhead markers. With “auto” the lines would trim before markers if marker.angleref is set to “previous”.

The ‘backoff’ property is a number and may be specified as:

An int or float in the interval [0, inf]
A tuple, list, or one-dimensional numpy array of the above

Returns
Return type: int|float|numpy.ndarray

property backoffsrc¶

Sets the source reference on Chart Studio Cloud for backoff.

The ‘backoffsrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns
Return type: str

property color¶

Sets the line color.

The ‘color’ property is a color and may be specified as:

A hex string (e.g. ‘#ff0000’)
An rgb/rgba string (e.g. ‘rgb(255,0,0)’)
An hsl/hsla string (e.g. ‘hsl(0,100%,50%)’)
An hsv/hsva string (e.g. ‘hsv(0,100%,100%)’)
A named CSS color:
aliceblue, antiquewhite, aqua, aquamarine, azure, beige, bisque, black, blanchedalmond, blue, blueviolet, brown, burlywood, cadetblue, chartreuse, chocolate, coral, cornflowerblue, cornsilk, crimson, cyan, darkblue, darkcyan, darkgoldenrod, darkgray, darkgrey, darkgreen, darkkhaki, darkmagenta, darkolivegreen, darkorange, darkorchid, darkred, darksalmon, darkseagreen, darkslateblue, darkslategray, darkslategrey, darkturquoise, darkviolet, deeppink, deepskyblue, dimgray, dimgrey, dodgerblue, firebrick, floralwhite, forestgreen, fuchsia, gainsboro, ghostwhite, gold, goldenrod, gray, grey, green, greenyellow, honeydew, hotpink, indianred, indigo, ivory, khaki, lavender, lavenderblush, lawngreen, lemonchiffon, lightblue, lightcoral, lightcyan, lightgoldenrodyellow, lightgray, lightgrey, lightgreen, lightpink, lightsalmon, lightseagreen, lightskyblue, lightslategray, lightslategrey, lightsteelblue, lightyellow, lime, limegreen, linen, magenta, maroon, mediumaquamarine, mediumblue, mediumorchid, mediumpurple, mediumseagreen, mediumslateblue, mediumspringgreen, mediumturquoise, mediumvioletred, midnightblue, mintcream, mistyrose, moccasin, navajowhite, navy, oldlace, olive, olivedrab, orange, orangered, orchid, palegoldenrod, palegreen, paleturquoise, palevioletred, papayawhip, peachpuff, peru, pink, plum, powderblue, purple, red, rosybrown, royalblue, rebeccapurple, saddlebrown, salmon, sandybrown, seagreen, seashell, sienna, silver, skyblue, slateblue, slategray, slategrey, snow, springgreen, steelblue, tan, teal, thistle, tomato, turquoise, violet, wheat, white, whitesmoke, yellow, yellowgreen

Returns
Return type: str

property dash¶

Sets the dash style of lines. Set to a dash type string (“solid”, “dot”, “dash”, “longdash”, “dashdot”, or “longdashdot”) or a dash length list in px (eg “5px,10px,2px,2px”).

The ‘dash’ property is an enumeration that may be specified as:

One of the following dash styles:
[‘solid’, ‘dot’, ‘dash’, ‘longdash’, ‘dashdot’, ‘longdashdot’]
A string containing a dash length list in pixels or percentages
(e.g. ‘5px 10px 2px 2px’, ‘5, 10, 2, 2’, ‘10% 20% 40%’, etc.)

Returns
Return type: str

property shape¶

Determines the line shape. With “spline” the lines are drawn using spline interpolation. The other available values correspond to step-wise line shapes.

The ‘shape’ property is an enumeration that may be specified as:

One of the following enumeration values:
[‘linear’, ‘spline’]

Returns
Return type: Any

property smoothing¶

Has an effect only if shape is set to “spline” Sets the amount of smoothing. 0 corresponds to no smoothing (equivalent to a “linear” shape).

The ‘smoothing’ property is a number and may be specified as:

An int or float in the interval [0, 1.3]

Returns
Return type: int|float

property width¶

Sets the line width (in px).

The ‘width’ property is a number and may be specified as:

An int or float in the interval [0, inf]

Returns
Return type: int|float

class plotly.graph_objects.scatterternary.Marker(arg=None, angle=None, angleref=None, anglesrc=None, autocolorscale=None, cauto=None, cmax=None, cmid=None, cmin=None, color=None, coloraxis=None, colorbar=None, colorscale=None, colorsrc=None, gradient=None, line=None, maxdisplayed=None, opacity=None, opacitysrc=None, reversescale=None, showscale=None, size=None, sizemin=None, sizemode=None, sizeref=None, sizesrc=None, standoff=None, standoffsrc=None, symbol=None, symbolsrc=None, **kwargs)¶

property angle¶

Sets the marker angle in respect to angleref.

The ‘angle’ property is a angle (in degrees) that may be specified as a number between -180 and 180, or a list, numpy array or other iterable thereof. Numeric values outside this range are converted to the equivalent value (e.g. 270 is converted to -90).

Returns
Return type: int|float|numpy.ndarray

property angleref¶

Sets the reference for marker angle. With “previous”, angle 0 points along the line from the previous point to this one. With “up”, angle 0 points toward the top of the screen.

The ‘angleref’ property is an enumeration that may be specified as:

One of the following enumeration values:
[‘previous’, ‘up’]

Returns
Return type: Any

property anglesrc¶

Sets the source reference on Chart Studio Cloud for angle.

The ‘anglesrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns
Return type: str

property autocolorscale¶

Determines whether the colorscale is a default palette (autocolorscale: true) or the palette determined by marker.colorscale. Has an effect only if in marker.color is set to a numerical array. In case colorscale is unspecified or autocolorscale is true, the default palette will be chosen according to whether numbers in the color array are all positive, all negative or mixed.

The ‘autocolorscale’ property must be specified as a bool (either True, or False)

Returns
Return type: bool

property cauto¶

Determines whether or not the color domain is computed with respect to the input data (here in marker.color) or the bounds set in marker.cmin and marker.cmax Has an effect only if in marker.color is set to a numerical array. Defaults to false when marker.cmin and marker.cmax are set by the user.

The ‘cauto’ property must be specified as a bool (either True, or False)

Returns
Return type: bool

property cmax¶

Sets the upper bound of the color domain. Has an effect only if in marker.color is set to a numerical array. Value should have the same units as in marker.color and if set, marker.cmin must be set as well.

The ‘cmax’ property is a number and may be specified as:

An int or float

Returns
Return type: int|float

property cmid¶

Sets the mid-point of the color domain by scaling marker.cmin and/or marker.cmax to be equidistant to this point. Has an effect only if in marker.color is set to a numerical array. Value should have the same units as in marker.color. Has no effect when marker.cauto is false.

The ‘cmid’ property is a number and may be specified as:

An int or float

Returns
Return type: int|float

property cmin¶

Sets the lower bound of the color domain. Has an effect only if in marker.color is set to a numerical array. Value should have the same units as in marker.color and if set, marker.cmax must be set as well.

The ‘cmin’ property is a number and may be specified as:

An int or float

Returns
Return type: int|float

property color¶

Sets the marker color. It accepts either a specific color or an array of numbers that are mapped to the colorscale relative to the max and min values of the array or relative to marker.cmin and marker.cmax if set.

The ‘color’ property is a color and may be specified as:

A hex string (e.g. ‘#ff0000’)
An rgb/rgba string (e.g. ‘rgb(255,0,0)’)
An hsl/hsla string (e.g. ‘hsl(0,100%,50%)’)
An hsv/hsva string (e.g. ‘hsv(0,100%,100%)’)
A named CSS color:
aliceblue, antiquewhite, aqua, aquamarine, azure, beige, bisque, black, blanchedalmond, blue, blueviolet, brown, burlywood, cadetblue, chartreuse, chocolate, coral, cornflowerblue, cornsilk, crimson, cyan, darkblue, darkcyan, darkgoldenrod, darkgray, darkgrey, darkgreen, darkkhaki, darkmagenta, darkolivegreen, darkorange, darkorchid, darkred, darksalmon, darkseagreen, darkslateblue, darkslategray, darkslategrey, darkturquoise, darkviolet, deeppink, deepskyblue, dimgray, dimgrey, dodgerblue, firebrick, floralwhite, forestgreen, fuchsia, gainsboro, ghostwhite, gold, goldenrod, gray, grey, green, greenyellow, honeydew, hotpink, indianred, indigo, ivory, khaki, lavender, lavenderblush, lawngreen, lemonchiffon, lightblue, lightcoral, lightcyan, lightgoldenrodyellow, lightgray, lightgrey, lightgreen, lightpink, lightsalmon, lightseagreen, lightskyblue, lightslategray, lightslategrey, lightsteelblue, lightyellow, lime, limegreen, linen, magenta, maroon, mediumaquamarine, mediumblue, mediumorchid, mediumpurple, mediumseagreen, mediumslateblue, mediumspringgreen, mediumturquoise, mediumvioletred, midnightblue, mintcream, mistyrose, moccasin, navajowhite, navy, oldlace, olive, olivedrab, orange, orangered, orchid, palegoldenrod, palegreen, paleturquoise, palevioletred, papayawhip, peachpuff, peru, pink, plum, powderblue, purple, red, rosybrown, royalblue, rebeccapurple, saddlebrown, salmon, sandybrown, seagreen, seashell, sienna, silver, skyblue, slateblue, slategray, slategrey, snow, springgreen, steelblue, tan, teal, thistle, tomato, turquoise, violet, wheat, white, whitesmoke, yellow, yellowgreen
A number that will be interpreted as a color according to scatterternary.marker.colorscale
A list or array of any of the above

Returns
Return type: str|numpy.ndarray

property coloraxis¶

Sets a reference to a shared color axis. References to these shared color axes are “coloraxis”, “coloraxis2”, “coloraxis3”, etc. Settings for these shared color axes are set in the layout, under layout.coloraxis, layout.coloraxis2, etc. Note that multiple color scales can be linked to the same color axis.

The ‘coloraxis’ property is an identifier of a particular subplot, of type ‘coloraxis’, that may be specified as the string ‘coloraxis’ optionally followed by an integer >= 1 (e.g. ‘coloraxis’, ‘coloraxis1’, ‘coloraxis2’, ‘coloraxis3’, etc.)

Returns
Return type: str

property colorbar¶

The ‘colorbar’ property is an instance of ColorBar that may be specified as:

An instance of plotly.graph_objects.scatterternary.marker.ColorBar

A dict of string/value properties that will be passed to the ColorBar constructor

Supported dict properties:

bgcolor
Sets the color of padded area.

bordercolor
Sets the axis line color.

borderwidth
Sets the width (in px) or the border enclosing this color bar.

dtick
Sets the step in-between ticks on this axis. Use with tick0. Must be a positive number, or special strings available to “log” and “date” axes. If the axis type is “log”, then ticks are set every 10^(n*dtick) where n is the tick number. For example, to set a tick mark at 1, 10, 100, 1000, … set dtick to 1. To set tick marks at 1, 100, 10000, … set dtick to 2. To set tick marks at 1, 5, 25, 125, 625, 3125, … set dtick to log_10(5), or 0.69897000433. “log” has several special values; “L<f>”, where f is a positive number, gives ticks linearly spaced in value (but not position). For example tick0 = 0.1, dtick = “L0.5” will put ticks at 0.1, 0.6, 1.1, 1.6 etc. To show powers of 10 plus small digits between, use “D1” (all digits) or “D2” (only 2 and 5). tick0 is ignored for “D1” and “D2”. If the axis type is “date”, then you must convert the time to milliseconds. For example, to set the interval between ticks to one day, set dtick to 86400000.0. “date” also has special values “M<n>” gives ticks spaced by a number of months. n must be a positive integer. To set ticks on the 15th of every third month, set tick0 to “2000-01-15” and dtick to “M3”. To set ticks every 4 years, set dtick to “M48”

exponentformat
Determines a formatting rule for the tick exponents. For example, consider the number 1,000,000,000. If “none”, it appears as 1,000,000,000. If “e”, 1e+9. If “E”, 1E+9. If “power”, 1x10^9 (with 9 in a super script). If “SI”, 1G. If “B”, 1B.

labelalias
Replacement text for specific tick or hover labels. For example using {US: ‘USA’, CA: ‘Canada’} changes US to USA and CA to Canada. The labels we would have shown must match the keys exactly, after adding any tickprefix or ticksuffix. labelalias can be used with any axis type, and both keys (if needed) and values (if desired) can include html-like tags or MathJax.

len
Sets the length of the color bar This measure excludes the padding of both ends. That is, the color bar length is this length minus the padding on both ends.

lenmode
Determines whether this color bar’s length (i.e. the measure in the color variation direction) is set in units of plot “fraction” or in *pixels. Use len to set the value.

minexponent
Hide SI prefix for 10^n if |n| is below this number. This only has an effect when tickformat is “SI” or “B”.

nticks
Specifies the maximum number of ticks for the particular axis. The actual number of ticks will be chosen automatically to be less than or equal to nticks. Has an effect only if tickmode is set to “auto”.

orientation
Sets the orientation of the colorbar.

outlinecolor
Sets the axis line color.

outlinewidth
Sets the width (in px) of the axis line.

separatethousands
If “true”, even 4-digit integers are separated

showexponent
If “all”, all exponents are shown besides their significands. If “first”, only the exponent of the first tick is shown. If “last”, only the exponent of the last tick is shown. If “none”, no exponents appear.

showticklabels
Determines whether or not the tick labels are drawn.

showtickprefix
If “all”, all tick labels are displayed with a prefix. If “first”, only the first tick is displayed with a prefix. If “last”, only the last tick is displayed with a suffix. If “none”, tick prefixes are hidden.

showticksuffix
Same as showtickprefix but for tick suffixes.

thickness
Sets the thickness of the color bar This measure excludes the size of the padding, ticks and labels.

thicknessmode
Determines whether this color bar’s thickness (i.e. the measure in the constant color direction) is set in units of plot “fraction” or in “pixels”. Use thickness to set the value.

tick0
Sets the placement of the first tick on this axis. Use with dtick. If the axis type is “log”, then you must take the log of your starting tick (e.g. to set the starting tick to 100, set the tick0 to 2) except when dtick`=*L<f>* (see `dtick for more info). If the axis type is “date”, it should be a date string, like date data. If the axis type is “category”, it should be a number, using the scale where each category is assigned a serial number from zero in the order it appears.

tickangle
Sets the angle of the tick labels with respect to the horizontal. For example, a tickangle of -90 draws the tick labels vertically.

tickcolor
Sets the tick color.

tickfont
Sets the color bar’s tick label font

tickformat
Sets the tick label formatting rule using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: h ttps://github.com/d3/d3-format/tree/v1.4.5#d3- format. And for dates see: https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format. We add two items to d3’s date formatter: “%h” for half of the year as a decimal number as well as “%{n}f” for fractional seconds with n digits. For example, 2016-10-13 09:15:23.456 with tickformat “%H~%M~%S.%2f” would display “09~15~23.46”

tickformatstops
A tuple of plotly.graph_objects.scatter ternary.marker.colorbar.Tickformatstop instances or dicts with compatible properties

tickformatstopdefaults
When used in a template (as layout.template.dat a.scatterternary.marker.colorbar.tickformatstop defaults), sets the default property values to use for elements of scatterternary.marker.colorbar.tickformatstops

ticklabeloverflow
Determines how we handle tick labels that would overflow either the graph div or the domain of the axis. The default value for inside tick labels is hide past domain. In other cases the default is hide past div.

ticklabelposition
Determines where tick labels are drawn relative to the ticks. Left and right options are used when orientation is “h”, top and bottom when orientation is “v”.

ticklabelstep
Sets the spacing between tick labels as compared to the spacing between ticks. A value of 1 (default) means each tick gets a label. A value of 2 means shows every 2nd label. A larger value n means only every nth tick is labeled. tick0 determines which labels are shown. Not implemented for axes with type “log” or “multicategory”, or when tickmode is “array”.

ticklen
Sets the tick length (in px).

tickmode
Sets the tick mode for this axis. If “auto”, the number of ticks is set via nticks. If “linear”, the placement of the ticks is determined by a starting position tick0 and a tick step dtick (“linear” is the default value if tick0 and dtick are provided). If “array”, the placement of the ticks is set via tickvals and the tick text is ticktext. (“array” is the default value if tickvals is provided).

tickprefix
Sets a tick label prefix.

ticks
Determines whether ticks are drawn or not. If “”, this axis’ ticks are not drawn. If “outside” (“inside”), this axis’ are drawn outside (inside) the axis lines.

ticksuffix
Sets a tick label suffix.

ticktext
Sets the text displayed at the ticks position via tickvals. Only has an effect if tickmode is set to “array”. Used with tickvals.

ticktextsrc
Sets the source reference on Chart Studio Cloud for ticktext.

tickvals
Sets the values at which ticks on this axis appear. Only has an effect if tickmode is set to “array”. Used with ticktext.

tickvalssrc
Sets the source reference on Chart Studio Cloud for tickvals.

tickwidth
Sets the tick width (in px).

title
plotly.graph_objects.scatterternary.mar ker.colorbar.Title instance or dict with compatible properties

titlefont
Deprecated: Please use scatterternary.marker.colorbar.title.font instead. Sets this color bar’s title font. Note that the title’s font used to be set by the now deprecated titlefont attribute.

titleside
Deprecated: Please use scatterternary.marker.colorbar.title.side instead. Determines the location of color bar’s title with respect to the color bar. Defaults to “top” when orientation if “v” and defaults to “right” when orientation if “h”. Note that the title’s location used to be set by the now deprecated titleside attribute.

x
Sets the x position of the color bar (in plot fraction). Defaults to 1.02 when orientation is “v” and 0.5 when orientation is “h”.

xanchor
Sets this color bar’s horizontal position anchor. This anchor binds the x position to the “left”, “center” or “right” of the color bar. Defaults to “left” when orientation is “v” and “center” when orientation is “h”.

xpad
Sets the amount of padding (in px) along the x direction.

y
Sets the y position of the color bar (in plot fraction). Defaults to 0.5 when orientation is “v” and 1.02 when orientation is “h”.

yanchor
Sets this color bar’s vertical position anchor This anchor binds the y position to the “top”, “middle” or “bottom” of the color bar. Defaults to “middle” when orientation is “v” and “bottom” when orientation is “h”.

ypad
Sets the amount of padding (in px) along the y direction.

Returns
Return type: plotly.graph_objects.scatterternary.marker.ColorBar

property colorscale¶

Sets the colorscale. Has an effect only if in marker.color is set to a numerical array. The colorscale must be an array containing arrays mapping a normalized value to an rgb, rgba, hex, hsl, hsv, or named color string. At minimum, a mapping for the lowest (0) and highest (1) values are required. For example, [[0, 'rgb(0,0,255)'], [1, 'rgb(255,0,0)']]. To control the bounds of the colorscale in color space, use marker.cmin and marker.cmax. Alternatively, colorscale may be a palette name string of the following list: Blackbody,B luered,Blues,Cividis,Earth,Electric,Greens,Greys,Hot,Jet,Picnic ,Portland,Rainbow,RdBu,Reds,Viridis,YlGnBu,YlOrRd.

The ‘colorscale’ property is a colorscale and may be specified as:

A list of colors that will be spaced evenly to create the colorscale. Many predefined colorscale lists are included in the sequential, diverging, and cyclical modules in the plotly.colors package.

A list of 2-element lists where the first element is the normalized color level value (starting at 0 and ending at 1), and the second item is a valid color string. (e.g. [[0, ‘green’], [0.5, ‘red’], [1.0, ‘rgb(0, 0, 255)’]])

One of the following named colorscales:

[‘aggrnyl’, ‘agsunset’, ‘algae’, ‘amp’, ‘armyrose’, ‘balance’,
‘blackbody’, ‘bluered’, ‘blues’, ‘blugrn’, ‘bluyl’, ‘brbg’, ‘brwnyl’, ‘bugn’, ‘bupu’, ‘burg’, ‘burgyl’, ‘cividis’, ‘curl’, ‘darkmint’, ‘deep’, ‘delta’, ‘dense’, ‘earth’, ‘edge’, ‘electric’, ‘emrld’, ‘fall’, ‘geyser’, ‘gnbu’, ‘gray’, ‘greens’, ‘greys’, ‘haline’, ‘hot’, ‘hsv’, ‘ice’, ‘icefire’, ‘inferno’, ‘jet’, ‘magenta’, ‘magma’, ‘matter’, ‘mint’, ‘mrybm’, ‘mygbm’, ‘oranges’, ‘orrd’, ‘oryel’, ‘oxy’, ‘peach’, ‘phase’, ‘picnic’, ‘pinkyl’, ‘piyg’, ‘plasma’, ‘plotly3’, ‘portland’, ‘prgn’, ‘pubu’, ‘pubugn’, ‘puor’, ‘purd’, ‘purp’, ‘purples’, ‘purpor’, ‘rainbow’, ‘rdbu’, ‘rdgy’, ‘rdpu’, ‘rdylbu’, ‘rdylgn’, ‘redor’, ‘reds’, ‘solar’, ‘spectral’, ‘speed’, ‘sunset’, ‘sunsetdark’, ‘teal’, ‘tealgrn’, ‘tealrose’, ‘tempo’, ‘temps’, ‘thermal’, ‘tropic’, ‘turbid’, ‘turbo’, ‘twilight’, ‘viridis’, ‘ylgn’, ‘ylgnbu’, ‘ylorbr’, ‘ylorrd’].

Appending ‘_r’ to a named colorscale reverses it.

Returns
Return type: str

property colorsrc¶

Sets the source reference on Chart Studio Cloud for color.

The ‘colorsrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns
Return type: str

property gradient¶

The ‘gradient’ property is an instance of Gradient that may be specified as:

An instance of plotly.graph_objects.scatterternary.marker.Gradient

A dict of string/value properties that will be passed to the Gradient constructor

Supported dict properties:

color
Sets the final color of the gradient fill: the center color for radial, the right for horizontal, or the bottom for vertical.

colorsrc
Sets the source reference on Chart Studio Cloud for color.

type
Sets the type of gradient used to fill the markers

typesrc
Sets the source reference on Chart Studio Cloud for type.

Returns
Return type: plotly.graph_objects.scatterternary.marker.Gradient

property line¶

The ‘line’ property is an instance of Line that may be specified as:

An instance of plotly.graph_objects.scatterternary.marker.Line

A dict of string/value properties that will be passed to the Line constructor

Supported dict properties:

autocolorscale
Determines whether the colorscale is a default palette (autocolorscale: true) or the palette determined by marker.line.colorscale. Has an effect only if in marker.line.color is set to a numerical array. In case colorscale is unspecified or autocolorscale is true, the default palette will be chosen according to whether numbers in the color array are all positive, all negative or mixed.

cauto
Determines whether or not the color domain is computed with respect to the input data (here in marker.line.color) or the bounds set in marker.line.cmin and marker.line.cmax Has an effect only if in marker.line.color is set to a numerical array. Defaults to false when marker.line.cmin and marker.line.cmax are set by the user.

cmax
Sets the upper bound of the color domain. Has an effect only if in marker.line.color is set to a numerical array. Value should have the same units as in marker.line.color and if set, marker.line.cmin must be set as well.

cmid
Sets the mid-point of the color domain by scaling marker.line.cmin and/or marker.line.cmax to be equidistant to this point. Has an effect only if in marker.line.color is set to a numerical array. Value should have the same units as in marker.line.color. Has no effect when marker.line.cauto is false.

cmin
Sets the lower bound of the color domain. Has an effect only if in marker.line.color is set to a numerical array. Value should have the same units as in marker.line.color and if set, marker.line.cmax must be set as well.

color
Sets the marker.line color. It accepts either a specific color or an array of numbers that are mapped to the colorscale relative to the max and min values of the array or relative to marker.line.cmin and marker.line.cmax if set.

coloraxis
Sets a reference to a shared color axis. References to these shared color axes are “coloraxis”, “coloraxis2”, “coloraxis3”, etc. Settings for these shared color axes are set in the layout, under layout.coloraxis, layout.coloraxis2, etc. Note that multiple color scales can be linked to the same color axis.

colorscale
Sets the colorscale. Has an effect only if in marker.line.color is set to a numerical array. The colorscale must be an array containing arrays mapping a normalized value to an rgb, rgba, hex, hsl, hsv, or named color string. At minimum, a mapping for the lowest (0) and highest (1) values are required. For example, [[0, 'rgb(0,0,255)'], [1, 'rgb(255,0,0)']]. To control the bounds of the colorscale in color space, use marker.line.cmin and marker.line.cmax. Alternatively, colorscale may be a palette name string of the following list: Blackbody,Bl uered,Blues,Cividis,Earth,Electric,Greens,Greys ,Hot,Jet,Picnic,Portland,Rainbow,RdBu,Reds,Viri dis,YlGnBu,YlOrRd.

colorsrc
Sets the source reference on Chart Studio Cloud for color.

reversescale
Reverses the color mapping if true. Has an effect only if in marker.line.color is set to a numerical array. If true, marker.line.cmin will correspond to the last color in the array and marker.line.cmax will correspond to the first color.

width
Sets the width (in px) of the lines bounding the marker points.

widthsrc
Sets the source reference on Chart Studio Cloud for width.

Returns
Return type: plotly.graph_objects.scatterternary.marker.Line

property maxdisplayed¶

Sets a maximum number of points to be drawn on the graph. 0 corresponds to no limit.

The ‘maxdisplayed’ property is a number and may be specified as:

An int or float in the interval [0, inf]

Returns
Return type: int|float

property opacity¶

Sets the marker opacity.

The ‘opacity’ property is a number and may be specified as:

An int or float in the interval [0, 1]
A tuple, list, or one-dimensional numpy array of the above

Returns
Return type: int|float|numpy.ndarray

property opacitysrc¶

Sets the source reference on Chart Studio Cloud for opacity.

The ‘opacitysrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns
Return type: str

property reversescale¶

Reverses the color mapping if true. Has an effect only if in marker.color is set to a numerical array. If true, marker.cmin will correspond to the last color in the array and marker.cmax will correspond to the first color.

The ‘reversescale’ property must be specified as a bool (either True, or False)

Returns
Return type: bool

property showscale¶

Determines whether or not a colorbar is displayed for this trace. Has an effect only if in marker.color is set to a numerical array.

The ‘showscale’ property must be specified as a bool (either True, or False)

Returns
Return type: bool

property size¶

Sets the marker size (in px).

The ‘size’ property is a number and may be specified as:

An int or float in the interval [0, inf]
A tuple, list, or one-dimensional numpy array of the above

Returns
Return type: int|float|numpy.ndarray

property sizemin¶

Has an effect only if marker.size is set to a numerical array. Sets the minimum size (in px) of the rendered marker points.

The ‘sizemin’ property is a number and may be specified as:

An int or float in the interval [0, inf]

Returns
Return type: int|float

property sizemode¶

Has an effect only if marker.size is set to a numerical array. Sets the rule for which the data in size is converted to pixels.

The ‘sizemode’ property is an enumeration that may be specified as:

One of the following enumeration values:
[‘diameter’, ‘area’]

Returns
Return type: Any

property sizeref¶

Has an effect only if marker.size is set to a numerical array. Sets the scale factor used to determine the rendered size of marker points. Use with sizemin and sizemode.

The ‘sizeref’ property is a number and may be specified as:

An int or float

Returns
Return type: int|float

property sizesrc¶

Sets the source reference on Chart Studio Cloud for size.

The ‘sizesrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns
Return type: str

property standoff¶

Moves the marker away from the data point in the direction of angle (in px). This can be useful for example if you have another marker at this location and you want to point an arrowhead marker at it.

The ‘standoff’ property is a number and may be specified as:

An int or float in the interval [0, inf]
A tuple, list, or one-dimensional numpy array of the above

Returns
Return type: int|float|numpy.ndarray

property standoffsrc¶

Sets the source reference on Chart Studio Cloud for standoff.

The ‘standoffsrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns
Return type: str

property symbol¶

Sets the marker symbol type. Adding 100 is equivalent to appending “-open” to a symbol name. Adding 200 is equivalent to appending “-dot” to a symbol name. Adding 300 is equivalent to appending “-open-dot” or “dot-open” to a symbol name.

The ‘symbol’ property is an enumeration that may be specified as:

One of the following enumeration values:
[0, ‘0’, ‘circle’, 100, ‘100’, ‘circle-open’, 200, ‘200’, ‘circle-dot’, 300, ‘300’, ‘circle-open-dot’, 1, ‘1’, ‘square’, 101, ‘101’, ‘square-open’, 201, ‘201’, ‘square-dot’, 301, ‘301’, ‘square-open-dot’, 2, ‘2’, ‘diamond’, 102, ‘102’, ‘diamond-open’, 202, ‘202’, ‘diamond-dot’, 302, ‘302’, ‘diamond-open-dot’, 3, ‘3’, ‘cross’, 103, ‘103’, ‘cross-open’, 203, ‘203’, ‘cross-dot’, 303, ‘303’, ‘cross-open-dot’, 4, ‘4’, ‘x’, 104, ‘104’, ‘x-open’, 204, ‘204’, ‘x-dot’, 304, ‘304’, ‘x-open-dot’, 5, ‘5’, ‘triangle-up’, 105, ‘105’, ‘triangle-up-open’, 205, ‘205’, ‘triangle-up-dot’, 305, ‘305’, ‘triangle-up-open-dot’, 6, ‘6’, ‘triangle-down’, 106, ‘106’, ‘triangle-down-open’, 206, ‘206’, ‘triangle-down-dot’, 306, ‘306’, ‘triangle-down-open-dot’, 7, ‘7’, ‘triangle-left’, 107, ‘107’, ‘triangle-left-open’, 207, ‘207’, ‘triangle-left-dot’, 307, ‘307’, ‘triangle-left-open-dot’, 8, ‘8’, ‘triangle-right’, 108, ‘108’, ‘triangle-right-open’, 208, ‘208’, ‘triangle-right-dot’, 308, ‘308’, ‘triangle-right-open-dot’, 9, ‘9’, ‘triangle-ne’, 109, ‘109’, ‘triangle-ne-open’, 209, ‘209’, ‘triangle-ne-dot’, 309, ‘309’, ‘triangle-ne-open-dot’, 10, ‘10’, ‘triangle-se’, 110, ‘110’, ‘triangle-se-open’, 210, ‘210’, ‘triangle-se-dot’, 310, ‘310’, ‘triangle-se-open-dot’, 11, ‘11’, ‘triangle-sw’, 111, ‘111’, ‘triangle-sw-open’, 211, ‘211’, ‘triangle-sw-dot’, 311, ‘311’, ‘triangle-sw-open-dot’, 12, ‘12’, ‘triangle-nw’, 112, ‘112’, ‘triangle-nw-open’, 212, ‘212’, ‘triangle-nw-dot’, 312, ‘312’, ‘triangle-nw-open-dot’, 13, ‘13’, ‘pentagon’, 113, ‘113’, ‘pentagon-open’, 213, ‘213’, ‘pentagon-dot’, 313, ‘313’, ‘pentagon-open-dot’, 14, ‘14’, ‘hexagon’, 114, ‘114’, ‘hexagon-open’, 214, ‘214’, ‘hexagon-dot’, 314, ‘314’, ‘hexagon-open-dot’, 15, ‘15’, ‘hexagon2’, 115, ‘115’, ‘hexagon2-open’, 215, ‘215’, ‘hexagon2-dot’, 315, ‘315’, ‘hexagon2-open-dot’, 16, ‘16’, ‘octagon’, 116, ‘116’, ‘octagon-open’, 216, ‘216’, ‘octagon-dot’, 316, ‘316’, ‘octagon-open-dot’, 17, ‘17’, ‘star’, 117, ‘117’, ‘star-open’, 217, ‘217’, ‘star-dot’, 317, ‘317’, ‘star-open-dot’, 18, ‘18’, ‘hexagram’, 118, ‘118’, ‘hexagram-open’, 218, ‘218’, ‘hexagram-dot’, 318, ‘318’, ‘hexagram-open-dot’, 19, ‘19’, ‘star-triangle-up’, 119, ‘119’, ‘star-triangle-up-open’, 219, ‘219’, ‘star-triangle-up-dot’, 319, ‘319’, ‘star-triangle-up-open-dot’, 20, ‘20’, ‘star-triangle-down’, 120, ‘120’, ‘star-triangle-down-open’, 220, ‘220’, ‘star-triangle-down-dot’, 320, ‘320’, ‘star-triangle-down-open-dot’, 21, ‘21’, ‘star-square’, 121, ‘121’, ‘star-square-open’, 221, ‘221’, ‘star-square-dot’, 321, ‘321’, ‘star-square-open-dot’, 22, ‘22’, ‘star-diamond’, 122, ‘122’, ‘star-diamond-open’, 222, ‘222’, ‘star-diamond-dot’, 322, ‘322’, ‘star-diamond-open-dot’, 23, ‘23’, ‘diamond-tall’, 123, ‘123’, ‘diamond-tall-open’, 223, ‘223’, ‘diamond-tall-dot’, 323, ‘323’, ‘diamond-tall-open-dot’, 24, ‘24’, ‘diamond-wide’, 124, ‘124’, ‘diamond-wide-open’, 224, ‘224’, ‘diamond-wide-dot’, 324, ‘324’, ‘diamond-wide-open-dot’, 25, ‘25’, ‘hourglass’, 125, ‘125’, ‘hourglass-open’, 26, ‘26’, ‘bowtie’, 126, ‘126’, ‘bowtie-open’, 27, ‘27’, ‘circle-cross’, 127, ‘127’, ‘circle-cross-open’, 28, ‘28’, ‘circle-x’, 128, ‘128’, ‘circle-x-open’, 29, ‘29’, ‘square-cross’, 129, ‘129’, ‘square-cross-open’, 30, ‘30’, ‘square-x’, 130, ‘130’, ‘square-x-open’, 31, ‘31’, ‘diamond-cross’, 131, ‘131’, ‘diamond-cross-open’, 32, ‘32’, ‘diamond-x’, 132, ‘132’, ‘diamond-x-open’, 33, ‘33’, ‘cross-thin’, 133, ‘133’, ‘cross-thin-open’, 34, ‘34’, ‘x-thin’, 134, ‘134’, ‘x-thin-open’, 35, ‘35’, ‘asterisk’, 135, ‘135’, ‘asterisk-open’, 36, ‘36’, ‘hash’, 136, ‘136’, ‘hash-open’, 236, ‘236’, ‘hash-dot’, 336, ‘336’, ‘hash-open-dot’, 37, ‘37’, ‘y-up’, 137, ‘137’, ‘y-up-open’, 38, ‘38’, ‘y-down’, 138, ‘138’, ‘y-down-open’, 39, ‘39’, ‘y-left’, 139, ‘139’, ‘y-left-open’, 40, ‘40’, ‘y-right’, 140, ‘140’, ‘y-right-open’, 41, ‘41’, ‘line-ew’, 141, ‘141’, ‘line-ew-open’, 42, ‘42’, ‘line-ns’, 142, ‘142’, ‘line-ns-open’, 43, ‘43’, ‘line-ne’, 143, ‘143’, ‘line-ne-open’, 44, ‘44’, ‘line-nw’, 144, ‘144’, ‘line-nw-open’, 45, ‘45’, ‘arrow-up’, 145, ‘145’, ‘arrow-up-open’, 46, ‘46’, ‘arrow-down’, 146, ‘146’, ‘arrow-down-open’, 47, ‘47’, ‘arrow-left’, 147, ‘147’, ‘arrow-left-open’, 48, ‘48’, ‘arrow-right’, 148, ‘148’, ‘arrow-right-open’, 49, ‘49’, ‘arrow-bar-up’, 149, ‘149’, ‘arrow-bar-up-open’, 50, ‘50’, ‘arrow-bar-down’, 150, ‘150’, ‘arrow-bar-down-open’, 51, ‘51’, ‘arrow-bar-left’, 151, ‘151’, ‘arrow-bar-left-open’, 52, ‘52’, ‘arrow-bar-right’, 152, ‘152’, ‘arrow-bar-right-open’, 53, ‘53’, ‘arrow’, 153, ‘153’, ‘arrow-open’, 54, ‘54’, ‘arrow-wide’, 154, ‘154’, ‘arrow-wide-open’]
A tuple, list, or one-dimensional numpy array of the above

Returns
Return type: Any|numpy.ndarray

property symbolsrc¶

Sets the source reference on Chart Studio Cloud for symbol.

The ‘symbolsrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns
Return type: str

class plotly.graph_objects.scatterternary.Selected(arg=None, marker=None, textfont=None, **kwargs)¶

property marker¶

The ‘marker’ property is an instance of Marker that may be specified as:

An instance of plotly.graph_objects.scatterternary.selected.Marker

A dict of string/value properties that will be passed to the Marker constructor

Supported dict properties:

color
Sets the marker color of selected points.

opacity
Sets the marker opacity of selected points.

size
Sets the marker size of selected points.

Returns
Return type: plotly.graph_objects.scatterternary.selected.Marker

property textfont¶

The ‘textfont’ property is an instance of Textfont that may be specified as:

An instance of plotly.graph_objects.scatterternary.selected.Textfont

A dict of string/value properties that will be passed to the Textfont constructor

Supported dict properties:

color
Sets the text font color of selected points.

Returns
Return type: plotly.graph_objects.scatterternary.selected.Textfont

class plotly.graph_objects.scatterternary.Stream(arg=None, maxpoints=None, token=None, **kwargs)¶

property maxpoints¶

Sets the maximum number of points to keep on the plots from an incoming stream. If maxpoints is set to 50, only the newest 50 points will be displayed on the plot.

The ‘maxpoints’ property is a number and may be specified as:

An int or float in the interval [0, 10000]

Returns
Return type: int|float

property token¶

The stream id number links a data trace on a plot with a stream. See https://chart-studio.plotly.com/settings for more details.

The ‘token’ property is a string and must be specified as:

A non-empty string

Returns
Return type: str

class plotly.graph_objects.scatterternary.Textfont(arg=None, color=None, colorsrc=None, family=None, familysrc=None, size=None, sizesrc=None, **kwargs)¶

property color¶

The ‘color’ property is a color and may be specified as:

A hex string (e.g. ‘#ff0000’)
An rgb/rgba string (e.g. ‘rgb(255,0,0)’)
An hsl/hsla string (e.g. ‘hsl(0,100%,50%)’)
An hsv/hsva string (e.g. ‘hsv(0,100%,100%)’)
A named CSS color:
aliceblue, antiquewhite, aqua, aquamarine, azure, beige, bisque, black, blanchedalmond, blue, blueviolet, brown, burlywood, cadetblue, chartreuse, chocolate, coral, cornflowerblue, cornsilk, crimson, cyan, darkblue, darkcyan, darkgoldenrod, darkgray, darkgrey, darkgreen, darkkhaki, darkmagenta, darkolivegreen, darkorange, darkorchid, darkred, darksalmon, darkseagreen, darkslateblue, darkslategray, darkslategrey, darkturquoise, darkviolet, deeppink, deepskyblue, dimgray, dimgrey, dodgerblue, firebrick, floralwhite, forestgreen, fuchsia, gainsboro, ghostwhite, gold, goldenrod, gray, grey, green, greenyellow, honeydew, hotpink, indianred, indigo, ivory, khaki, lavender, lavenderblush, lawngreen, lemonchiffon, lightblue, lightcoral, lightcyan, lightgoldenrodyellow, lightgray, lightgrey, lightgreen, lightpink, lightsalmon, lightseagreen, lightskyblue, lightslategray, lightslategrey, lightsteelblue, lightyellow, lime, limegreen, linen, magenta, maroon, mediumaquamarine, mediumblue, mediumorchid, mediumpurple, mediumseagreen, mediumslateblue, mediumspringgreen, mediumturquoise, mediumvioletred, midnightblue, mintcream, mistyrose, moccasin, navajowhite, navy, oldlace, olive, olivedrab, orange, orangered, orchid, palegoldenrod, palegreen, paleturquoise, palevioletred, papayawhip, peachpuff, peru, pink, plum, powderblue, purple, red, rosybrown, royalblue, rebeccapurple, saddlebrown, salmon, sandybrown, seagreen, seashell, sienna, silver, skyblue, slateblue, slategray, slategrey, snow, springgreen, steelblue, tan, teal, thistle, tomato, turquoise, violet, wheat, white, whitesmoke, yellow, yellowgreen
A list or array of any of the above

Returns
Return type: str|numpy.ndarray

property colorsrc¶

Sets the source reference on Chart Studio Cloud for color.

The ‘colorsrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns
Return type: str

property family¶

HTML font family - the typeface that will be applied by the web browser. The web browser will only be able to apply a font if it is available on the system which it operates. Provide multiple font families, separated by commas, to indicate the preference in which to apply fonts if they aren’t available on the system. The Chart Studio Cloud (at https://chart- studio.plotly.com or on-premise) generates images on a server, where only a select number of fonts are installed and supported. These include “Arial”, “Balto”, “Courier New”, “Droid Sans”,, “Droid Serif”, “Droid Sans Mono”, “Gravitas One”, “Old Standard TT”, “Open Sans”, “Overpass”, “PT Sans Narrow”, “Raleway”, “Times New Roman”.

The ‘family’ property is a string and must be specified as:

A non-empty string
A tuple, list, or one-dimensional numpy array of the above

Returns
Return type: str|numpy.ndarray

property familysrc¶

Sets the source reference on Chart Studio Cloud for family.

The ‘familysrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns
Return type: str

property size¶

The ‘size’ property is a number and may be specified as:

An int or float in the interval [1, inf]
A tuple, list, or one-dimensional numpy array of the above

Returns
Return type: int|float|numpy.ndarray

property sizesrc¶

Sets the source reference on Chart Studio Cloud for size.

The ‘sizesrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns
Return type: str

class plotly.graph_objects.scatterternary.Unselected(arg=None, marker=None, textfont=None, **kwargs)¶

property marker¶

The ‘marker’ property is an instance of Marker that may be specified as:

An instance of plotly.graph_objects.scatterternary.unselected.Marker

A dict of string/value properties that will be passed to the Marker constructor

Supported dict properties:

color
Sets the marker color of unselected points, applied only when a selection exists.

opacity
Sets the marker opacity of unselected points, applied only when a selection exists.

size
Sets the marker size of unselected points, applied only when a selection exists.

Returns
Return type: plotly.graph_objects.scatterternary.unselected.Marker

property textfont¶

The ‘textfont’ property is an instance of Textfont that may be specified as:

An instance of plotly.graph_objects.scatterternary.unselected.Textfont

A dict of string/value properties that will be passed to the Textfont constructor

Supported dict properties:

color
Sets the text font color of unselected points, applied only when a selection exists.

Returns
Return type: plotly.graph_objects.scatterternary.unselected.Textfont

plotly.graph_objects.Scatterternary¶

plotly.graph_objects.scatterternary¶

`plotly.graph_objects`.Scatterternary¶

`plotly.graph_objects`.scatterternary¶